NOTE: With a new TPM chip, there is no need to disable.
🔹 ASUS TPM DISABLE
Watch this simple tutorial video. INTEL 00:00 & AMD 01:20
IN CASE YOU CAN'T DISABLE TPM:
Open powershell as admin, and execute the following commands:
Get-BitLockerVolume
IF PROTECTION STATUS IS ON:
Disable-BitLocker -MountPoint "C:"
IF OFF, OR YOU DISABLED BITLOCKER, DO:
Disable-TpmAutoProvisioning
Clear-Tpm < clears hashThis will make sure TPM cannot be queried/read/banned.
🔹 MSI TPM DISABLE
Watch this simple tutorial video. INTEL 00:00 & AMD 01:05
IN CASE YOU CAN'T DISABLE TPM:
Open powershell as admin, and execute the following commands:
Get-BitLockerVolume
IF PROTECTION STATUS IS ON:
Disable-BitLocker -MountPoint "C:"
IF OFF, OR YOU DISABLED BITLOCKER, DO:
Disable-TpmAutoProvisioning
Clear-Tpm < clears hashThis will make sure TPM cannot be queried/read/banned.
🔹 ASROCK TPM DISABLE
Watch this simple tutorial video. INTEL 00:00 & AMD 01:35
IN CASE YOU CAN'T DISABLE TPM:
Open powershell as admin, and execute the following commands:
Get-BitLockerVolume
IF PROTECTION STATUS IS ON:
Disable-BitLocker -MountPoint "C:"
IF OFF, OR YOU DISABLED BITLOCKER, DO:
Disable-TpmAutoProvisioning
Clear-Tpm < clears hashThis will make sure TPM cannot be queried/read/banned.
🔹 GIGABYTE/AORUS TPM DISABLE
Watch this simple tutorial video. INTEL 00:00 & AMD01:50
IN CASE YOU CAN'T DISABLE TPM:
Open powershell as admin, and execute the following commands:
Get-BitLockerVolume
IF PROTECTION STATUS IS ON:
Disable-BitLocker -MountPoint "C:"
IF OFF, OR YOU DISABLED BITLOCKER, DO:
Disable-TpmAutoProvisioning
Clear-Tpm < clears hashThis will make sure TPM cannot be queried/read/banned.
🔹 ANY OTHER MOTHEROARDS TPM DISABLE
Find a YouTube tutorial on how to disable TPM.
IN CASE YOU CAN'T DISABLE TPM:
Open powershell as admin, and execute the following commands:
Get-BitLockerVolume
IF PROTECTION STATUS IS ON:
Disable-BitLocker -MountPoint "C:"
IF OFF, OR YOU DISABLED BITLOCKER, DO:
Disable-TpmAutoProvisioning
Clear-Tpm < clears hashThis will make sure TPM cannot be queried/read/banned.
TURN OFF WIFI & BLUETOOTH[ REQUIRED ]
ONLY DO THIS STEP IF YOU HAVE WIFI/BLUETOOTH AVAILABLE, OTHERWISE SKIP IT.
WHY IS THIS REQUIRED?
For an Ethernet connection, we can permanently spoof your MAC address. However, this isn't possible on a Wi-Fi connection (wireless). Therefore, we highly recommend disabling Wi-Fi in the BIOS if that option is available. The same goes for Bluetooth. It leaves traces behind that EAC/Vanguard (and sometimes BE) scan.
IF YOU'RE USING WIFI, AND CAN NOT USE ETHERNET, NO ISSUES:1. Please try to get on an Ethernet connection, since it is important for the spoof.
2. If u can't, use our "WIFI MAC SPOOFER" on the Miscellaneous tab in the loader.
3. Purchase a new Wi-Fi Adapter/USB (if applicable) if ur using that on ur PC.
