HP Permanent Spoof
Instructions for the standard permanent spoof.
Last updated
Instructions for the standard permanent spoof.
Last updated
This process of 'unlocking' the motherboard has to be done ONCE. You do not have to redo it anymore. Your motherboard will be permanently unlocked to be able to spoof. 🌟 Easiness: 9/10 Simple | 5 Minutes Average Time. 🕒
Plug in a USB to ur computer (Must be 32GB or less, not more)
Right-click on the USB drive in Windows Explorer and click on Format.
Change the File System to FAT32, then click on start and wait until completed.
Select USB Letter in the Loader, and run HP Unlock! No files will be shown on the drive.
After success, hold SHIFT, click Restart, and keep holding SHIFT!
Select 'Use a device' and select the USB (Known as "Flash Drive")
Just WAIT now, and u will see something that looks like this picture below:
Now, after this WAIT, it will ask "Manufacturer mode to unlock mode": CLICK YES!
Now it will boot into Windows again, and the USB can be removed. In case Windows does not boot, please remove the USB, & wait.
Make sure there is no BIOS Password enabled. 🔐 This will cause the serials not to change on HP. If "Manufacturer mode" doesn't show up, flash your BIOS to an older version.
