Verse permanent
AI Chatbot 24/7
  • WELCOME
    • 👋NEW INSTRUCTIONS
Powered by GitBook
On this page
  • REQUIREMENTS:
  • THIS WAY OF REINSTALLING IS HIGHLY RECOMMENDED!
  • HOW TO REINSTALL & SPOOF DISKS (BYPASS DISK BAN)
  • YOUR USB SHOULD LOOK SIMILAR LIKE THIS SCREENSHOT:
  • WHEN YOU ARE ON WINDOWS:
  1. SETUP INSTRUCTIONS
  2. Windows reinstall

RAID Reinstallation

RAID reinstallation instructions.

Last updated 5 months ago

REQUIREMENTS:

  1. A USB with 8GB of storage space (32GB Max)

  2. A little bit of handiness, and a little knowledge about PCs

THIS WAY OF REINSTALLING IS HIGHLY RECOMMENDED!

🌟 Easiness: 7/10 Doable, Not Hard | 15 Minutes Average Time. 🕒

WHY IS THIS HIGHLY RECOMMENDED?

The reason this reinstallation is recommended, especially for people with a lot of HWID bans on their PC, is because this reinstallation method changes your disk drive serials too. This is an important factor and almost a 99% successful spoof at the end. Reminder: This guide is for AMD ONLY, unless u know what ur doing on Intel. 💢


HOW TO REINSTALL & SPOOF DISKS (BYPASS DISK BAN)

  • Download the Media Creation Tool above, click "Download Now"

  • Open the Media Creation Tool as an administrator

  • Select Create Installation media (USB Flash drive)

  • Use all the recommended options & continue & wait for it to finish.


YOUR USB SHOULD LOOK SIMILAR LIKE THIS SCREENSHOT:

NOTE: When reinstalling Windows, most modern systems will automatically detect and install basic Ethernet drivers, so ur connection will work fine after the installation. ✅ In some cases, you may need to manually download and install network drivers. Make sure to download your network drivers (LAN) from your corresponding motherboard model. So for example "Asus B550 Network drivers" on Google, and put them in the USB drive. You can skip this step since this is just a precaution, but there is a small risk of no connection after Windows reinstallation. 🌐



  • USE WINDOWS 10 PRO | MAKE AN OFFLINE ACCOUNT

  • Turn OFF All privacy questions/settings



WHEN YOU ARE ON WINDOWS:

[5] CHECK OLD & NEW DISK SERIALS ON NEW WINDOWS Now, use the "disk-serialchecker.exe" and see if the serials are changed, compare old vs new.


[1] AMD RAID FILES: <- PUT FILES ON THE USB. MAKE SURE TO REMEMBER YOUR DISK SERIALS. MAKE A PHOTO OF THEM ON YOUR PHONE.

[2] ONCE COMPLETE AND USB MATCHES THE SCREENSHOT, RESTART PC AND BOOT INTO BIOS HOW TO EASILY BOOT INTO BIOS: [3] DISABLE CSM, AND ENABLE "RAID" IN BIOS. Advanced > Integrated peripherals (or) Storage Configurations. SATA Mode > "RAID" / NVME Mode > "RAID" | SAVE & EXIT BIOS, GET BACK INTO BIOS AGAIN. [4] CONTINUE WITH THE REST OF THE RAID SETUP WITH THIS VIDEO GUIDE <- video instructions for RAID setup.

Make sure to follow these steps while and after reinstallation: 1. Make an offline account or a new Microsoft account. Don't log in to the old ones. 2. Do not log in to OneDrive, Logitech G Hub, or Geforce Experience. 3. Install: to prevent errors.

DOWNLOAD RAID FILES
Video tutorial here.
https://streamable.com/9o2zci
https://aka.ms/vs/17/release/vc_redist.x64.exe
LogoDownload Windows 10